Leapfrog Creatr HS

Rs. 253,699.00


The HS stands for High Speed. With print speed up to 300 mm/s the Creatr HS is a desktop 3D printer that is difficult to overtake. Together with a print volume of 13,6 liters and the ability to print objects up to 29 cm of length, this is your printer for big and fast prints.

Equipped with dual extrusion, the Creatr HS creates an enormous freedom to design. Easy to operate using the 4 inch full color LCD screen and a USB device. All features packed in a sturdy yet stylish design, make this printer versatile, convenient and built to last.

The Creatr HS is fully assembled and pre-calibrated when it arrives at your doorstep. Just install the included professional software, insert the filament and you’ll be ready to make your first object in about 45 minutes. So go on and create the future. Or better: unleash it.

 

STAND ALONE

The Creatr HS is equipped with a 4inch full color LCD screen and only 1 knob to control it. Say goodbye to SD cards, run your Creatr HS simply from a USB stick. Preheat and start printing in less than 10 minutes (USB 3.0 compatible).

LARGEST BUILD VOLUME

The Creatr HS has the largest build volume in its class, with an astonishing volume of 13.6L and the possibility to print objects up to 28cm of length. The big building volume gives you freedom to design, make up-to-scale prototypes and other endless printing possibilities. A whole lot of centimeters fit into our printers, so splitting up your model in multiple parts and reassemble it afterwards, has come to an end. If you can design it, you can build it.

HIGH SPEED

HS stands for High Speed. With a print speed up to 300mm/s the Creatr HS will get you your prints extremely fast, without losing accuracy and quality. Use of light material minimizes the weight of the extruder carriage, enabling rapid prototyping and quick results for customers.

STURDY DESIGN

The complete structure of the Creatr HS is made out of standard industrial grade aluminum parts and therefore built to last. The accuracy of the printer is unaffected by temperature changes and does not diminish over time.

DUAL EXTRUDER

Our dual extruder allows you to print with two types of materials or colors at the same time, broaden your range of applications. Using two types of material is crucial when printing with support structures. Our water soluble PVA support allows users to rinse away the support structures after printing, leaving a clean and high quality print.

For designers, dual extrusion offers the opportunity to print with two colors in one print. 

 

Specifications Metric Imperial
Physical dimensions (DWH) 633 x 486 x 523 mm 24.9 x 19.1 x 20.6 inch
* Input power** 85-133VAC / 170-264VAC
Input frequency 47 - 63 Hz
Power consumption 4 Amp. @230V / 6.4 Amp. @ 115V
Build size single extruder (DWH) 280 x 270 x 180 mm 11.0 x 10.6 x 7.1 inch
Build size single extruder (DWH) 280 x 240 x 180 mm 11.0 x 9.4 x 7.1 inch
Build size dual extruder (DWH) Build volume 13.6 L. 3.0 Gal.
Heated bed Max. 90°C Max. 194°F
Hot end Max. 275°C Max. 527°F
Number of extruders 2
Extruder size 0.35 mm 0.014 inch
Filament size 1.75 mm 0.069 inch
Layer thickness 0.02 – 0.35 mm 0.00079 – 0.014 inch
Max. print speed (DW) 18000 mm/min. 300 mm/sec. 708.66 inch/min.

11.8 inch/sec.

 

Max. travel speed (DW) 24000 mm/min. 400 mm/sec. 944.88 inch/min. 15.8 inch/sec.
Stepper motors 1.8° Step angle with 1/16 micro stepping
Positioning accuracy (DW) 0.0169 mm 0.00067 inch
Positioning accuracy (H) 0.02 mm 0.00079 inch
Body/frame construction Aluminium extrusion profiles
Printbed Z-levelling 4-knob hand levelling
Internal OS Linux
USB standalone format .gcode format
USB accepted drive storage size Not limited
USB connection to computer Virtual COM port
Supported computer OS Windows 98, XP SP3 32-bit, SP2 64-bit, Vista, 2000, Server Editions OS X Mavericks 10.9 or later

*DWH: Depth, Width, Height. Coordinate system reference Y, X, Z
**Power input is set by Leapfrog, customers cannot change power input between 230/110V

More Detail:

Precision

  • Layer height (mm)0.02
  • Extruder / nozzle diameter (mm)0.35
  • Heated printing environmentUp to 90° C

Build

  • Body / ConstructionAluminium extrusion profiles
  • Printer dimensions (cm)63.3 x 48.6 x 52.3

Speed

  • Printing speed (mm/s)30 - 300
  • Travel speed (mm/s)40 - 400

Size

  • Max print volume (liter)13.6

General

  • Dual ExtruderYes
  • Stand-alone (USB)Yes

Materials

  • Compatible filaments: ABS, PLA, PVA, Nylon, Brick, Hybrid transparent 

 

Customer Reviews

Based on 1 review Write a review

More from this collection